Traversing Wall : CP-TVW(C)

Description

The Traversing Wall offers a physical challenge for children of all ages as they move along the wall using only hand and foot grips. These have been placed in such a way that it is not possible to gain much height.

The traversing wall is constructed from a timber frame and tough dark brown slip-resistant birch plywood boards with large wire mesh pattern. The upright timbers are concreted into the ground. We also fit Postsaver sleeves at the ground line section of all timber posts that are extended into the ground. This will keep the cause of ground rot out and the preservative in, ensuring that the new piece of equipment will last for many years.

The specially designed coloured rock climbing holds are suitable for both hands and feet to use. Excellent for developing upper and lower body strength and coordination.

Due to the height of the foot holds safety surfacing is not required. Where installed on grass we would suggest the use of Grass Safety Mats around the product to prevent ground erosion.

Where installed on tarmac a 20mm rubber wetpour surfacing can be laid to a distance of 1.5m around the product.

The size can be made to suit the space in 1.2m multiples. As a guide a 3.6m wall starts at £1895.00.

This product is a good standalone feature product for a commercial organisation to increase footfall and offer something a little bit more unusual.

The main picture shows a standalone unit – the price for a 3.6m single wall-mounted unit is £1595.

Please contact sales@caledoniaplay.com for more information.

 

Specification

18mm external plywood with a black ware surface supported by a timber frame concreted into the ground or attached to existing fence line or wall.
The timber frame is constructed of 10 x 10cm posts with heat-sealed bitumen sleeves that will keep the causes of ground rot out and the preservative in making the product last longer.
A beveled edge on top of the posts and the plywood sheets allow them to shed water.

Poly-resin rock climbing holds in red, green, yellow and blue with metal washer inserted.
The hand and foot grips are positioned approximately 30cm apart, foot grips not exceeding 0.5m off the ground  8 – 12 grips per linear metre.
High tensile timber locking bolts.
Timbers are sourced from sustainable managed forests with FSC or PEFC chain of custody certificates.

The boards used are tough dark brown, slip-resistant birch plywood with large wire mesh pattern and a phenolic film surface.

 

Dimensions

boards positioned 100mm off the ground

height: 2.3m

board width: 1.2m

product length will vary in 1.2m multiples and depending on space available

We are unable to offer online ordering of this product.

Optional Accessories